In the pursuit of home aesthetics and comfort, the selection and installation of flooring are particularly important. Reinforced flooring has become the first choice for many home decoration due to its advantages of wear resistance, easy cleaning, and easy installation. However, the correct paving method is the key to ensuring that the floor is aesthetically pleasing and durable, and reducing subsequent maintenance troubles. This article will provide a detailed introduction to the installation methods of reinforced flooring, helping you easily create your ideal home flooring.
1、 Preparation before paving
1. Measurement and Planning
Use a tape measure to accurately measure the length and width of the room, calculate the required number of floors, and reserve a certain loss rate (usually 5% -10%).
It is generally recommended to lay the flooring in a smooth direction to enhance the visual effect.
2. Ground treatment
Ensure that the ground is flat, dry, free of oil stains and cracks. Uneven areas need to be leveled with self leveling or cement mortar.
Ground cleaning is crucial, as it requires thorough removal of dust and impurities to avoid affecting the effectiveness of the floor adhesive.
3. Preparation of auxiliary materials
The auxiliary materials required for reinforced floor paving include moisture-proof pads, skirting boards, floor specific adhesives, floor fasteners, etc.
Prepare corresponding paving tools according to the type of floor (locking or adhesive), such as floor cutting knives, hammers, tapping blocks, seam runners, etc.
2、 Paving steps
1. Pre laying
Before formal installation, it is recommended to leave the floor indoors for at least 24 hours to adapt to indoor temperature and humidity.
Pre lay the flooring and check for consistency in color and texture, as well as any obvious flaws.
2. Lay moisture-proof pads
Lay a moisture-proof pad on a clean and dry ground to ensure full coverage, and seal the overlapping edges with tape.
3. Floor paving
Lock in flooring: Starting from the upper left or right corner of the room, reserve 8-12mm expansion joints between the first row of flooring and the wall, and fix them with floor wedges. Insert the subsequent floor into the locking buckle of the previous floor one by one, ensuring a tight and seamless fit.
Adhesive flooring: Apply floor specific adhesive evenly on the ground, taking care not to over apply it to prevent overflow and contamination of the floor surface. When laying the floor, gently press with a scraper to ensure that the glue is evenly distributed and the floor fits tightly.
4. Cutting and splicing
When encountering obstacles such as doorways and pillars, it is necessary to use a floor cutting knife to accurately cut the floor and ensure that the edges are smooth.
Try to conceal the joints as much as possible, use floor clips or skirting boards to cover the gaps and maintain a beautiful appearance.
5. Install skirting board
After the floor is laid, install the skirting board and fix it with nails or special buckles to ensure that there is no gap between the skirting board and the wall or floor.
3、 Precautions after paving
1. Cleaning and maintenance
After the paving is completed, clean up the site in a timely manner to avoid residue such as glue and sawdust.
When cleaning for the first time, use a slightly damp mop to gently wipe the floor, avoiding the use of large amounts of water or acidic cleaning agents.
2. Temperature and humidity control
Maintain appropriate indoor temperature and humidity to prevent the floor from expanding or contracting due to environmental changes.
3. Avoid direct pressure from heavy objects
When placing heavy objects in a fixed position for a long time, use furniture floor mats to distribute pressure and prevent local depressions in the floor.
4. Regular inspection and maintenance
Regularly inspect the condition of the floor, promptly address issues such as wear and tear, warping, etc., and extend the service life of the floor.
conclusion
The installation of reinforced flooring may seem simple, but the details are revealed in detail. Through careful preparation, standardized paving steps, and proper maintenance in the later stage, your laminate flooring will surely exhibit the best visual effect and durability performance. I hope this article can provide useful guidance for your home decoration journey, making your home more warm and beautiful due to the selection and installation of flooring.